Home
Author:
Jessica Kielman
I’m Jessica, a mom on a mission to show other women that you can live well without breaking the bank. I like to share the thrifty, creative ways that I make changes in my home in the hopes that it will spark the creativity in someone else! I love to share DIY projects, crafts, simple recipes and cleaning tips too!
Published on: | Updated on:
Making your own Homemade Laundry Detergent is by far one of the easiest DIY's I've done so far! Let's face it, laundry detergent can get expensive. Not only is it getting more expensive by the day, but most store bought laundry detergents are full of additives and chemicals. I love good smelling laundry, but have you ever stopped to consider what in the world they put in there to make it smell so good? In an effort to cut down the use of chemicals in our home, I decided to try making my own detergent, and guess what? I LOVE IT! I also make my own Homemade Fabric Softener, and it's super cheap!
It only takes 3 ingredients to make this detergent, and it is much less expensive than any store bought detergent that I have come across.
You start by grating one bar of FELS-NAPTHA soap in a bowl. It costs less than $1 per bar and can be found in the laundry section of the grocery store. If you have a food processor, you can grind it up in there instead. It only took a few minutes to grate it using a cheese grater.
It will make about 1 ½ cups.
Next, add 3 cups each of the Washing Sodaand Borax Detergent Booster. Mix well.
I stored mine in a glass containger and added a small scoop!
My scoop is ¼ cup scoop, which is exactly what you will need for each load! It cleans my laundry so well, and actually smells good too!
The Borax costs less than $4 per box and so does the washing soda...both can be used multiple times!
I cannot guarantee it, but have tried this in an HE washer. It worked fine and didn't suds a lot, which is the problem with most non HE store bought detergents.
Need a little help with getting the stains out of your laundry? Click HERE to view and print my Laundry Stain Remover Cheat Sheet!
Looking for more Tips and Tricks, like How to Clean In Between the Glass on Your Oven Door? Click HERE or the photo below for tons of cleaning tips and tricks!
Have a tip or trick you would like to share? Email me at [emailprotected] !
Rate Our Content: 
(5 votes, average: 5.00 out of 5)
Loading...
You Might Also Enjoy
Make Your Own Washing Soda With One Household Ingredient
Tons of Tips For Cleaning With Vinegar
DIY Reusable Dryer Sheets
13 Ingredients for DIY Natural Cleaning Recipes
56 responses to “Homemade Laundry Detergent Powder Recipe”
What kind of washer do you have? Wondering if this works for he washers?
Reply
It should be fine for HE, I can't guarantee it, but because it suds less than some store bought, it should be. Hope this helps! ~Jess
Reply
I have an HE and it works great, love it and thank you for ALL your posts!!!
Reply
It's definitely safe for HE! Thanks for sharing! ~Jess
Reply
I need a cheap but good laundry soap
I use the formula in my front loader HE. It works very well. I scent it with scent oils.. I never use softener, but do use wool and/or alpaca dryer balls.
How much fading does it cause on the clothes
Reply
Hi, I was wondering if this will work for my HE Front Loading Washer?
Reply
It should be fine for HE, I can't guarantee it, but because it suds less than some store bought, it should be. Hope this helps! ~Jess
Reply
my sister uses it in her front loader and says it works great, I add a couple more bars to mine when I make it
Reply
This is pretty much the recipe I've been using for the last year, only I use 2 cups of the washing soda and borax each...not for any particular reason, the recipe I found actually only called for one each and I thought that seemed a little stingy! I guess on my next batch I'll try 3 cups instead! I feel like this does a perfectly fine job, it's easy, it's cheap, and it's fun to feel like you've accomplished a little do-it-yourself. :^)
Reply
I have a HE washer and I have made this with ivory soap. I used ivory only because the kids did the expand ivory in the microwave experiment and it then crumbles. I didn't want it to go to waste. I throw it in directly with the clothes and have t tried it in the dispenser, but have had no problems in my HE front loader.
Reply
Thank you so much for sharing, Jolene! Good to know! ~Jess
Reply
Hi!
I am really trying to find out what I should use overhere in the Netherlands in regards to ingredients. Anybody any idea?Thnks!!
Reply
How well does it clean?
Reply
I have been using 1 bar Fels Naptha to 1 cup each borax and 1 cup Washing Soda. I guess I could switch to 2 or 3. I use it in my HE washer with no problem at all. Has anyone calculated the cost per load? It would mean knowing the number of cups of content in boxes in Washing Soda and Borax
Reply
Hey guys!!! I've been using this recipe for years!!! LOVE IT! I usually just shred my Fels Naptha bar with my food processor. I do three bars at a time. I use one, then put the other two individually in zip lock bags, ready to be mixed and used for the next batch. ALSO....I like to add "oxi clean"...about 1 cup to my batch. And I've added the Downy scent booster flakes. The cheapest is at Dollar Genreal for $5. I just add 1/4 to 1/2 cup per batch. (Still want to keep things economical!!!)
I watch my husband's stinky blue-collar shirts with this as well as baseball pants etc. Stains come out, clothes are fresh. I haven't noticed much color fading with this recipe either.Reply
Downy scent booster is just epsoms salts saturated with fragrance. Save your money! Epsom salts are super cheap then make or purchase essential oil blends to sanitize your laundry. Save the fragrance for the diy softrner!
Reply
Great idea, thanks for sharing!!
Reply
How much Epsom salts?
Reply
I've been using basically this same recipe for years
My husband does construction and I have two little dirty boys and everything comes out clean. We only use a couple tablespoons per load. I didn't figure it out per load although I usually do at least one load a day... here is my cost breakdown http://littlesproutgrowing.blogspot.com/2010/11/laundry-soap-update.html?m=0Reply
I would just like to add that I have been using an awesome stain remover. It is 2 cups peroxide and 1 cup blue dawn dishwashing detergent. Mix them together and put in a spray bottle. It does an awesome job. Even on sweat stains and mud. We live on a farm and my husband comes in all the time with all kinds of new stains.
Reply
Do you have a recipe for liquid laundry detergent?
Reply
I have a he washer and I have been using this recipe. It works great . It doesn't sud up like other brand soaps. I love it. Saves my family a lot of money on laundry detergent.
Reply
So I love your scoop and am getting ready to make this recipe and have been renovating my laundry area and was wondering where you got it. Thanks so much!!!
you can get the scoops at Walmart
Reply
does anyone have a problem with yellow stains on their clothes, which I think is from the Fells?
Reply
help I have an old top load whirlpool washer that was my g-mas an still going strong, I live in Pa (USA) an how can I get the stains out, I thought it was something else but where it is winding up is not where food stains would b?????
Reply
Yellow staining --Might be rust from old washer tub, or something jammed in an edge (e.g., a paperclip or penny somewhere in the old washer).
Reply
If you put FELS-NAPTHA in the microwave and zap it for about 30 seconds it will blow up and then you take it out. Let it cool down and after a few days you can just crush it into fine particles. It is allot easier than grating it, I always seem to get my skin in it when I do that. But the zapping will be easier to do and you can tell that it is done when it is about ten times bigger than it was. It will also make your house smell too.
Reply
I cut my bar of soap into smaller chunks and put it in with the dry ingredients into my food processor. I make it in minutes. Have been using this recipe for five years. I will try your Fabric Softener Recipe.
Reply
Just wondering, does the grated soap dissolve in cold water washes?
Reply
To save $$$$ on my electric bill I always use cold water for everything! Works well for whites this way also! About once a month I wash my All whites in very hot water and add Clorox. Just for a boost to my well washed white things including old lady protection bed and chair pads! I am very fussy and am happy with my method!
Reply
I do mostly cold water wash, too. Chlorine does break down rubber (not just in elastic bands; often found in some stitching or ornamentation, not declared on labels).
However, hot water or other disinfecting process for underwear and bed linens is important for killing bacteria and dustmites. A good alternative disinfectant: bright sunshine ("UV" light!), so clothesline drying is a great, safe, cheap way to clean, too.Reply
I too always wash in cold and add white vinegar to the wash of my towels and sheets. I read an article not too long ago that stated washing clothes in hot water breaks down the ability for the laundry soap to clean, not to mention the fading and extra wear on your items.
Reply
I do not know what borax is? i am looking for a natural recipe so that it is ok to use with bio septic tanks
Reply
Hi! I have a few questions about the homemade laundry detergent so please bear with me! So is there any way you can add a fabric softener to the soap like those downy unstoppable beads? I would prefer to add that than to make my own softener as I want something that will make my clothes smell really good but don’t have time to wait til the rinsing cycle and plus it would make it easier to just throw it all in at once. Would it be a good idea? If not then I’ll consider making my own softener but just adding it in with the soap when I’m washing. Also, does the soap make a lot of suds because that’s what I want. Should I add two bars instead of one or at least a half of a bar with that one too? Does the washing soda whiten or brighten the color of the clothes? It doesn’t change the colors does it? And lastly how does the clothes feel being washed? Are they soft?
Reply
How many loads can you make with this?
Reply
Bob, I haven't made this yet, but the instructions say that the soap makes about 1 1/2 cups, and the Borax 3 cups, the Soda 3 cups. That all adds up to 7 1/2 cups of laundry soap. We are instructed to use 1/4 cup of the laundry soap per load. That seems to be about 30 loads, if my math is still working.???? ????
Reply
Pardon my ignorance. I keep seeing things saying "How to clean your Keurig" What is a Keurig? I don't think we have them here in Australia But we may have similar.
Reply
Hi, Coral! Kuerig is a brand of coffee maker in the US that uses K cups or coffee pods to make coffee. Hope this helps!
Reply
Hello- I’ve seen this recipe with all the same ingredients except they add water and make this into a paste like detergent. Do you why they would do it this way? Honestly not sure which one to make. I’m thinking they probably work the same. Help please?
Thank You-
RoseReply
Hi, Rose! I'm not sure about the paste, but. you could test it with a small amount. I would worry about a paste not dissolving in the wash well.
Reply
Oops I made it but I put 3 cups of baking soda and washing soda LOL it won't affect anything right do you think it would still wash good if I add in top 3 cups of borax
Reply
Great, thanks for sharing this article.Really looking forward to read more. Really Great.
Reply
Copper transformer recycling Copper scrap waste reduction practices Copper smelting services
Reply
Copper scrap yard prices Copper scrap industry regulations Scrap Copper market
Reply
Copper scrap industry partnerships Copper scrap traders Copper alloy recycling solutions
Reply
Aluminium scrap resale Aluminium metal reclaiming Aluminum roof scrap
Reply
Metal recycling strategies Aluminium scrap refining Aluminium scrap import/export regulations
Metal waste brokerage, Benefits of recycling aluminum cable scrap, Metal waste gradingReply
Responsible metal recycling Ferrous material recycling workforce training Iron waste handling
Ferrous material grading standards, Iron scrap logistics, Metal reprocessing operations
Reply
Metal reclamation strategies Recycling facilities for aluminum scrap Aluminium recycling chain of custody
Metal recovery and repurposing, Selling aluminum cable for cash, Metal recovery yardReply
Copper scrap shredding Copper is an essential mineral for the global energy industry, and its role in our future energy transition cannot be underestimated. Copper is needed in order to sustainably generate clean energy and to support the electrification of transportation. The demand for copper will only continue to increase as we move towards a carbon-neutral world. One of the main uses of copper in the energy transition is in clean energy production. Copper is used extensively in renewable energy systems such as wind turbines and solar panels. Wind turbines require around 4 to 8 tons of copper per megawatt, or about 14,000 to 28,000 pounds of copper per turbine. Similarly, solar photovoltaic (PV) cells also require a significant amount of copper wiring to connect all the cells together. Copper is also essential for storing and transmitting energy, which is important for a grid that relies heavily on renewable energy sources. Large batteries, such as those used in electric vehicles and in energy storage systems for power plants, also require copper for wiring and electronic components. Copper is also used to create power transmission lines that can transport energy from renewable sources to urban areas. As we move towards a greener transportation sector, copper will become increasingly important. Electric vehicles require more copper than traditional gas-fueled cars, mainly due to the large-scale production of electric motors and battery systems. This means that the growth of electric vehicles will drive up demand for copper. However, copper mining and production is not without its environmental and social impacts. Mining can lead to deforestation, habitat destruction, and water pollution. Additionally, the social and economic benefits of copper mining are not always shared equitably with local communities and workers. To ensure a sustainable transition to a greener future that relies on copper, it will be crucial for the industry to address these social and environmental concerns. It is also important to consider alternative materials and recycling methods to reduce the demand for new copper production. In conclusion, copper is a vital component of the energy transition towards a more sustainable and environmentally friendly future. Its use in renewable energy, energy storage, and transportation will continue to increase, and it is important for the industry to address the potential environmental and social impacts associated with increasing copper production. While copper remains a valuable mineral for the future of energy, we must be mindful of its use and find ways to minimize its negative impacts Metal reclaiming facility services Copper scrap trading company Copper waste reduction Copper scrap reclamation techniques Copper scrap industry associations Metal scrap processing efficiency
Reply
Metal waste management and recycling Ferrous scrap diagnostics Iron waste handling
Ferrous metal recycle yard, Scrap iron management, Metal reprocessing and reclaiming
Reply
Metal compaction services Ferrous waste recovery facility Scrap iron repurposing
Ferrous metal remarketing, Iron reprocessing center, Metal scrap repurposing services
Reply
Metal recycling solutions yard Ferrous material resource conservation Iron scrap utilization services
Ferrous material advertising campaign, Iron scrap utilization and recycling, Metal refuse reclamation
Reply
Leave a Reply
Featured in
